TERMS AND CONDITIONS

Between

(1) West Hampstead Plumbing & Heating Ltd, a company incorporated and registered in England and Wales under company number 08924172 whose registered office is situated at Unit 6 Burmarsh Workshops, Marsden Street, London, NW5 3JA (“the Company”, “we”, “us” or “our”); and

(2) The customer identified in the quotation, proposal, estimate, acceptance form, invoice or other contractual documentation (“the Customer”, “you” or “your”).

BACKGROUND

A. The Company provides plumbing, heating, gas, boiler, renewable energy, maintenance and associated services.

B. The Customer wishes to engage the Company to supply certain goods, services and/or works.

C. The Company agrees to provide such goods, services and/or works subject to these Terms and Conditions.

D. These Terms and Conditions shall apply to and form part of every Contract entered into between the Company and the Customer.

1.         DEFINITIONS

In these Terms and Conditions, unless the context otherwise requires, the following words and expressions shall have the meanings set out below:

“Business Day” means any day other than a Saturday, Sunday or public holiday in England.

“Commencement Date” means the date on which the Contract comes into force in accordance with clause 1.

“Contract” means the agreement between the Company and the Customer comprising these Terms and Conditions together with any quotation, proposal, estimate, specification, work order, acceptance form or other document issued by the Company and accepted by the Customer.

“Customer” means the individual, business, company, organisation or other entity purchasing Goods and/or Services from the Company.

“Emergency Call-Out” means any request for urgent attendance where there is a risk to health, safety, property, heating, hot water supply, water supply, gas installation or drainage system.

“Goods” means any products, equipment, fixtures, fittings, appliances, parts, materials or other items supplied by the Company.

“Installation” means any installation, replacement, upgrade, commissioning or associated works carried out by the Company.

“Materials” means any goods, parts, components, consumables or equipment supplied, installed or used by the Company during the Works.

“Proposal” means any quotation, estimate, proposal, specification, scope of works, work order or similar document issued by the Company describing the Goods and/or Services to be provided.

“Property” means the premises, land or location where the Works are to be carried out.

“Services” means all labour, services, advice, inspections, surveys, testing, maintenance, repairs, installations, commissioning and other works provided by the Company.

“Variation” means any change to the agreed scope of Works, Goods, Services, specification, materials, design or programme after the Contract has been formed.

“Works” means all Services, labour, installations, repairs, maintenance, testing, commissioning, inspections, surveys and associated activities carried out by the Company.

“Working Hours” means the Company’s normal operating hours as notified to the Customer from time to time.

1.2       References to:

(a) a person shall include an individual, company, partnership, limited liability partnership, organisation, trust or other legal entity;

(b) legislation shall include any amendment, modification, extension or re-enactment of that legislation from time to time;

(c) the singular shall include the plural and vice versa; and

(d) headings are included for convenience only and shall not affect the interpretation of these Terms and Conditions.

2.         QUOTATIONS, ESTIMATES AND CONTRACT FORMATION

2.1 Quotations and Estimates

Any quotation, estimate or proposal issued by the Company is valid for a period of thirty (30) days from the date of issue unless otherwise stated in writing.

2.2 Non-Binding Estimates

Any estimate provided by the Company is an approximation based on the information available at the time and does not constitute a fixed price offer.

The final price may be adjusted where additional works, materials, labour or unforeseen circumstances arise.

2.3 Fixed Price Quotations

Where the Company provides a fixed price quotation, the quoted price shall apply only to the specific Works detailed within the quotation.

Any additional works, materials or services requested by the Customer or required due to unforeseen circumstances shall be treated as a Variation and charged separately.

2.4 Acceptance

The Contract shall be formed when the Customer:

(a) signs and returns a quotation, proposal or acceptance form;

(b) provides written acceptance by email or other electronic means;

(c) pays any deposit requested by the Company; or

(d) instructs the Company to commence the Works.

Whichever occurs first shall constitute acceptance of the Contract and these Terms and Conditions.

2.5 Reliance on Information Provided

The Company shall be entitled to rely upon any information, measurements, drawings, specifications or instructions provided by the Customer.

Where such information proves to be inaccurate, incomplete or misleading, the Company reserves the right to adjust the price, programme or scope of Works accordingly.

2.6 Pre-Contract Surveys

Any quotation may be subject to a site inspection, survey or further investigation.

Where a survey identifies issues that were not reasonably apparent at the time the quotation was prepared, the Company reserves the right to revise the quotation before commencement of the Works.

2.7 Customer Responsibility

The Customer shall review all quotations, proposals, specifications and supporting documentation carefully and notify the Company of any errors, omissions or discrepancies before acceptance.

2.8 No Verbal Representations

The Customer acknowledges that they have not relied upon any verbal statement, representation or promise made by the Company unless expressly confirmed in writing.

3.         PERMISSIONS, LICENCES AND APPROVALS

3.1 Customer Responsibility

The Customer shall be responsible for obtaining and maintaining any permissions, consents, licences, approvals or authorisations required in connection with the Works unless the Company has expressly agreed otherwise in writing.

3.2 Planning Permission and Building Regulations

The Customer shall be responsible for ensuring that any necessary planning permission, listed building consent, conservation area consent, landlord consent, building regulation approval or other statutory approval has been obtained prior to commencement of the Works.

3.3 Reliance on Customer Information

The Company shall be entitled to rely upon any information, documentation, approvals or confirmations provided by the Customer regarding permissions and approvals.

The Company shall not be liable for any loss, delay, cost or expense arising from inaccurate, incomplete or incorrect information supplied by the Customer.

3.4 Suspension of Works

Where the Company reasonably believes that the required permission, consent or approval has not been obtained, the Company may suspend or delay the Works until satisfactory evidence is provided.

Any resulting delay shall not constitute a breach of contract by the Company.

3.5 Additional Costs

Any costs, losses, delays, additional labour, wasted visits, administration costs or other expenses incurred by the Company as a result of missing permissions, approvals or consents shall be payable by the Customer.

3.6 Regulatory Compliance

The Company shall carry out the Works in accordance with all applicable laws, regulations and industry standards relevant to the services being provided.

Where applicable, this may include compliance with:

(a) Building Regulations;

(b) Gas Safety Regulations;

(c) Water Regulations;

(d) MCS requirements;

(e) RECC requirements; and

(f) any other statutory or regulatory obligations applicable to the Works.

3.7 Access for Inspections

The Customer shall provide reasonable access for any inspections, surveys, certification requirements or compliance checks necessary to complete the Works.

3.8 Failure to Obtain Required Permissions

Where the Customer proceeds with the Works without obtaining any required permission, consent or approval, the Customer shall remain liable for all sums due under the Contract and the Company shall not be responsible for any resulting enforcement action, delay, alteration, removal or remedial works required by any third party or regulatory authority.

4.         CHARGES, PAYMENTS AND DEPOSITS

4.1 Contract Price

The price payable for the Goods and/or Services shall be as set out in the quotation, proposal or other written document issued by the Company.

All prices are exclusive of VAT unless expressly stated otherwise.

4.2 Deposits

The Company reserves the right to request a deposit before commencing the Works, ordering materials or reserving installation dates.

Any deposit requested shall be specified within the quotation or proposal.

4.3 Stage Payments

For larger projects, the Company may require payment by instalments or stage payments throughout the duration of the Works.

The payment schedule shall be detailed within the quotation, proposal or invoice.

4.4 Payment Due Date

Unless otherwise agreed in writing, all invoices shall become due and payable immediately upon issue.

Where payment terms are specified within a quotation, proposal or invoice, payment shall be made by the stated due date.

4.5 Final Payment

Final payment shall become due upon practical completion of the Works.

The existence of minor defects, snagging items or matters not materially affecting the use of the installation shall not entitle the Customer to withhold payment in full.

4.6 Variations

Any Variation requested by the Customer or required as a result of unforeseen circumstances shall be charged in addition to the Contract Price.

Where reasonably practicable, the Company shall provide details of the additional costs before carrying out the Variation.

4.7 Additional Works

Where additional works become necessary due to circumstances that were not reasonably foreseeable at the time of quotation, the Company shall notify the Customer as soon as reasonably practicable.

Any additional labour, materials or services required shall be chargeable at the Company’s prevailing rates.

4.8 Material Price Increases

Where there is a significant increase in the cost of materials, equipment, products or third-party services between the date of quotation and the commencement of the Works, the Company reserves the right to adjust the Contract Price accordingly.

The Company shall notify the Customer of any such adjustment before proceeding.

4.9 Late Payment

If payment is not received by the due date, the Company reserves the right to charge interest on the outstanding balance at a rate of 4% per annum above the Bank of England base rate, accruing daily until payment is made in full.

4.10 Suspension of Works

The Company reserves the right to suspend the Works immediately where any payment becomes overdue.

Any delay arising from such suspension shall not constitute a breach of contract by the Company.

The Customer shall remain liable for any additional costs, losses or delays arising from the suspension.

4.11 Debt Recovery Costs

The Customer shall indemnify the Company for any reasonable costs incurred in recovering overdue sums, including but not limited to administration costs, debt recovery fees, legal costs and court fees.

4.12 No Set-Off

The Customer shall not withhold, deduct or set off any payment due under the Contract unless required by law or expressly agreed in writing by the Company.

4.13 Ownership of Goods

Ownership of any Goods supplied by the Company shall not pass to the Customer until payment has been received in full for all Goods and Services supplied under the Contract.

4.14 Accepted Payment Methods

Payments shall be made using the payment methods specified by the Company from time to time.

4.15 Time of Payment

Time for payment shall be of the essence under the Contract.

5.         CUSTOMER RESPONSIBILITIES

5.1 Access to the Property

The Customer shall provide the Company, its employees, agents and subcontractors with safe, clear and reasonable access to the Property at all times required to carry out the Works.

5.2 Safe Working Environment

The Customer shall ensure that the Property provides a safe working environment and shall notify the Company of any known hazards, risks or defects that may affect the Works.

5.3 Preparation of the Property

The Customer shall ensure that all areas affected by the Works are cleared of furniture, personal belongings, valuables and other obstructions before commencement of the Works.

The Company shall not be responsible for any delays arising from the Customer’s failure to adequately prepare the Property.

5.4 Utilities and Facilities

The Customer shall provide access to reasonable supplies of electricity, water and toilet facilities where required for the completion of the Works.

5.5 Parking and Access Restrictions

The Customer shall inform the Company of any parking restrictions, permit requirements, gated access arrangements, management company restrictions or other access limitations before commencement of the Works.

Any parking charges, permit costs, penalties or additional labour costs incurred as a result of undisclosed restrictions shall be payable by the Customer.

5.6 Accuracy of Information

The Customer warrants that all information, drawings, plans, specifications, measurements and instructions provided to the Company are accurate and complete.

The Company shall not be liable for any loss, delay or additional cost arising from inaccurate or incomplete information supplied by the Customer.

5.7 Customer Delays

Where the Customer causes any delay to the Works, including failure to provide access, instructions, approvals, decisions or information, the Company reserves the right to recover any reasonable additional costs incurred.

5.8 Hidden Defects and Existing Conditions

The Customer acknowledges that certain defects, damage, deterioration, non-compliant installations, hidden pipework, wiring, drainage issues or structural defects may not become apparent until the Works have commenced.

The Company shall not be responsible for any pre-existing defects or conditions that were not reasonably visible or discoverable prior to commencement of the Works.

5.9 Customer-Supplied Materials

Where the Customer supplies any materials, equipment, fixtures, fittings or appliances, the Company shall not be responsible for the quality, suitability, compatibility, performance or warranty of such items.

Any delays, defects or additional costs arising from customer-supplied items shall be the responsibility of the Customer.

5.10 Cooperation

The Customer shall cooperate with the Company throughout the duration of the Works and shall promptly provide any approvals, decisions, information or instructions reasonably requested by the Company.

5.11 Failure to Comply

Where the Customer fails to comply with their obligations under this clause, the Company reserves the right to suspend the Works until the issue has been resolved and recover any reasonable costs arising as a result.

6.         GOODS, MATERIALS AND EQUIPMENT

6.1 Supply of Goods

The Company shall supply the Goods specified within the quotation, proposal or other agreed documentation.

The Company reserves the right to supply equivalent products, materials or equipment where the originally specified items become unavailable, discontinued or subject to supply chain issues, provided that any replacement is of comparable quality and suitability.

6.2 Ownership of Goods

Ownership of any Goods supplied by the Company shall remain with the Company until all sums due under the Contract have been paid in full.

Until ownership passes, the Customer shall take reasonable care of all Goods delivered to the Property.

6.3 Risk

Risk in the Goods shall pass to the Customer upon delivery to the Property or upon installation, whichever occurs first.

6.4 Manufacturer Warranties

Many Goods supplied by the Company benefit from manufacturer warranties or guarantees.

Such warranties are provided by the manufacturer and are subject to the manufacturer’s terms and conditions.

The Company shall provide reasonable assistance in facilitating warranty claims where appropriate but shall not be responsible for the performance of any manufacturer’s obligations.

6.5 Customer-Supplied Goods

Where Goods, materials, fixtures, fittings, appliances or equipment are supplied by the Customer, the Company shall not be liable for:

(a) defects in the supplied items;

(b) compatibility issues;

(c) manufacturer defects;

(d) delays arising from the supplied items; or

(e) any additional labour required as a result of the supplied items.

Any additional costs arising shall be payable by the Customer.

6.6 Storage of Goods

Where Goods are delivered to the Property before installation, the Customer shall ensure that they are stored safely and securely.

The Company shall not be responsible for loss, theft or damage occurring after delivery unless caused by the Company’s negligence.

6.7 Availability of Goods

All quotations and installation dates are subject to the availability of materials, equipment and products.

The Company shall not be liable for delays arising from manufacturer shortages, supplier delays, transportation issues or circumstances outside its reasonable control.

6.8 Special Order Goods

Any Goods specially ordered, manufactured, customised or obtained specifically for the Customer may not be returnable.

Where the Customer cancels the Contract after such Goods have been ordered, the Customer shall remain liable for the cost of those Goods together with any reasonable costs incurred by the Company.

6.9 Disposal of Existing Equipment

Unless otherwise agreed in writing, any equipment, appliances, fixtures, fittings or materials removed during the Works shall become the property of the Company and may be disposed of at its discretion.

Where the Customer wishes to retain any removed items, they must notify the Company before commencement of the Works.

6.10 Product Information

Any product literature, specifications, brochures, performance data or marketing materials provided by manufacturers are supplied for general information purposes only.

The Company shall not be liable for inaccuracies, omissions or changes made by manufacturers or third-party suppliers.

7.         INSTALLATION, SERVICES AND WORKS

7.1 Standard of Workmanship

The Company shall carry out the Works with reasonable care and skill and in accordance with applicable laws, regulations and recognised industry standards.

7.2 Attendance and Appointments

The Company shall use reasonable endeavours to attend the Property on any agreed date and within any agreed timeframe.

However, all attendance dates and times are estimates only and the Company shall not be liable for delays caused by traffic, weather conditions, supplier delays, emergencies, previous jobs overrunning or circumstances beyond its reasonable control.

7.3 Access During the Works

The Customer shall provide uninterrupted access to the Property for the duration of the Works.

Where access is denied, restricted or delayed, the Company reserves the right to recover any additional costs incurred.

7.4 Emergency Call-Out Services

Where the Company provides emergency call-out services, attendance times are estimates only and cannot be guaranteed.

Emergency call-out charges, labour rates and material costs shall be charged at the Company’s prevailing rates.

7.5 Existing Systems and Installations

The Company shall use reasonable care when working on existing systems, installations, pipework, appliances, fittings and equipment.

However, the Company shall not be responsible for defects, failures, leaks, faults or weaknesses arising from the age, condition, deterioration or pre-existing state of any existing installation.

7.6 Hidden Defects

The Customer acknowledges that hidden defects, non-compliant installations, defective pipework, faulty wiring, drainage issues, structural defects or other unforeseen issues may only become apparent once the Works have commenced.

Any additional work required as a result shall be treated as a Variation and charged accordingly.

7.7 Power Flushing

Where the Company carries out power flushing or system cleansing services, the Customer acknowledges that existing heating systems may contain hidden weaknesses, corrosion, blockages, damaged components or deteriorated pipework.

The Company shall not be liable for leaks, failures or faults that occur as a result of pre-existing weaknesses within the system which were not reasonably identifiable before the service was carried out.

7.8 Drainage and Blockages

The Company does not guarantee the permanent removal of blockages within drainage, waste or pipework systems where underlying defects, misuse, structural issues or external factors exist.

Any subsequent blockage shall be treated as a separate issue unless directly caused by the Company’s negligence.

7.9 Gas Safety and Warning Notices

Where the Company identifies a gas safety issue, unsafe installation or potentially dangerous condition, the Company may issue a warning notice, disconnect equipment, cap supplies or take any action required by applicable regulations or safety standards.

The Customer shall be responsible for complying with any recommendations or remedial works identified.

7.10 Customer Instructions

Where the Customer instructs the Company to proceed against professional advice, recommendations or warnings provided by the Company, the Company reserves the right to decline the Works or require written confirmation from the Customer before proceeding.

The Company shall not be liable for any loss, damage, defect or failure resulting directly from the Customer’s decision to disregard such advice.

7.11 Subcontractors

The Company reserves the right to engage suitably qualified subcontractors to carry out all or part of the Works.

The Company shall remain responsible for the performance of any subcontracted Works.

7.12 Photographs and Records

The Company may take photographs, videos and other records of the Property, the Works and any existing defects before, during and after completion of the Works.

Such records may be used for quality control, compliance, training, insurance, dispute resolution and evidential purposes.

The Company shall not use identifiable images of the Customer or the interior of the Property for marketing purposes without consent.

7.13 Making Good

The Company shall make good any damage directly caused by its negligence during the Works.

Unless otherwise agreed in writing, the Company shall not be responsible for decorative works including painting, wallpapering, tiling, plastering or specialist finishes following completion of the Works.

7.14 Completion of Works

The Works shall be deemed practically complete when they are substantially finished and capable of being used for their intended purpose, notwithstanding the existence of minor defects, snagging items or outstanding documentation.

7.15 Snagging

The Customer shall notify the Company of any snagging items or defects within a reasonable period following completion.

The Company shall be given a reasonable opportunity to inspect and rectify any genuine defects before the Customer instructs any third party to undertake remedial works.

8.         VARIATIONS, ADDITIONAL WORKS AND UNFORESEEN CIRCUMSTANCES

8.1 Variations Requested by the Customer

The Customer may request changes to the agreed Works at any time.

The Company shall not be obliged to carry out any Variation unless it agrees to do so.

8.2 Additional Charges

Any Variation may result in adjustments to:

(a) the Contract Price;

(b) the programme of Works;

(c) the completion date; and

(d) the materials, equipment or labour required.

The Customer shall be responsible for all additional costs arising from any agreed Variation.

8.3 Confirmation of Variations

Where reasonably practicable, the Company shall provide details of any Variation and the associated costs before carrying out the additional work.

The Customer’s verbal instruction, written instruction, email, text message, electronic communication or conduct requesting the Variation shall constitute acceptance of the additional cost.

8.4 Unforeseen Circumstances

The Customer acknowledges that certain circumstances may not become apparent until the Works have commenced.

Examples include, but are not limited to:

(a) hidden pipework defects;

(b) concealed leaks;

(c) defective installations;

(d) structural defects;

(e) electrical issues;

(f) drainage defects;

(g) asbestos or hazardous materials;

(h) inaccessible services; and

(i) non-compliant previous workmanship.

8.5 Additional Works Arising from Unforeseen Circumstances

Where unforeseen circumstances arise, the Company shall notify the Customer as soon as reasonably practicable.

Any additional labour, materials, equipment, specialist contractors or remedial works required shall be treated as additional works and charged separately.

8.6 Suspension of Works

Where unforeseen circumstances prevent the safe or practical continuation of the Works, the Company may suspend the Works until appropriate instructions, approvals or agreements are received from the Customer.

8.7 Specialist Contractors

Where additional specialist services are required, including but not limited to electrical works, structural works, asbestos removal, scaffold services or specialist surveys, the Company may:

(a) engage suitably qualified contractors on the Customer’s behalf; or

(b) require the Customer to appoint such contractors directly.

Any associated costs shall be payable by the Customer.

8.8 Abortive Visits

Where the Company attends the Property and is unable to carry out the Works due to circumstances outside its reasonable control, including lack of access, customer cancellation, unavailable services, incomplete preparatory works or missing permissions, the Company reserves the right to charge for the visit, labour time and any associated costs incurred.

8.9 Delays Caused by Variations

The Company shall not be liable for any delay arising from:

(a) requested Variations;

(b) additional works;

(c) unforeseen circumstances;

(d) delays in receiving Customer instructions; or

(e) delays caused by third parties.

8.10 Acceptance of Additional Works

Where the Customer authorises additional works to proceed, such authorisation shall form part of the Contract and these Terms and Conditions shall apply to those works.

9.         WARRANTIES, GUARANTEES AND REMEDIAL WORKS

9.1 Workmanship Guarantee

Subject to these Terms and Conditions, the Company provides a workmanship guarantee for the period specified within the quotation, proposal or other contractual documentation relating to the Works.

The applicable guarantee period may vary depending on the nature of the Goods and Services provided, including whether the Works are carried out under any applicable industry accreditation, certification or regulatory scheme.

The workmanship guarantee applies only to defects arising directly from the Company’s workmanship.

9.2 Manufacturer Warranties

Any products, appliances, boilers, heat pumps, controls, equipment or materials supplied by the Company may be subject to separate manufacturer warranties or guarantees.

Such warranties are provided by the manufacturer and are subject to the manufacturer’s own terms and conditions.

9.3 Warranty Registration

Where applicable, the Company shall use reasonable endeavours to register manufacturer warranties following installation.

The Customer shall provide any information reasonably required to facilitate such registration.

9.4 Notification of Defects

The Customer shall notify the Company in writing as soon as reasonably practicable upon becoming aware of any alleged defect or issue.

The Customer shall provide sufficient details to enable the Company to investigate the matter.

9.5 Right to Inspect

Before instructing any third party to undertake remedial works, the Customer shall provide the Company with a reasonable opportunity to inspect the alleged defect and, where appropriate, carry out remedial works.

9.6 Remedial Works

Where the Company accepts that a defect arises from its workmanship and falls within the workmanship guarantee period, the Company shall, at its option:

(a) repair the defect;

(b) replace the defective work; or

(c) provide another reasonable remedy.

9.7 Exclusions

The workmanship guarantee shall not apply to:

(a) fair wear and tear;

(b) misuse, neglect or accidental damage;

(c) lack of maintenance;

(d) customer interference or unauthorised alterations;

(e) defects arising from customer-supplied materials or equipment;

(f) defects caused by third parties;

(g) defects arising from existing systems, installations or components not installed by the Company; or

(h) issues arising from circumstances beyond the Company’s reasonable control.

9.8 Existing Systems

The Company does not warrant or guarantee the condition, performance, suitability or lifespan of any existing system, pipework, appliance, fitting, drainage system or installation that was not supplied and installed by the Company.

9.9 Customer Modifications

Any workmanship guarantee shall automatically cease in relation to any part of the Works which has been altered, repaired, adjusted, modified or interfered with by any person other than the Company without the Company’s prior written consent.

9.10 Emergency Repairs by Third Parties

Where emergency circumstances require immediate intervention by a third party to prevent damage or ensure safety, the Customer shall, where reasonably possible, notify the Company before instructing such third party.

9.11 Limitation of Guarantee

The workmanship guarantee is limited to the repair or replacement of defective workmanship and does not extend to compensation for indirect losses, consequential losses, loss of profits, loss of use or any other financial loss.

9.12 Transferability

Any workmanship guarantee shall remain with the Property for the applicable guarantee period specified for the relevant Works and may be transferred to a subsequent owner of the Property unless otherwise stated in writing.

9.13 Statutory Rights

Nothing in this clause shall affect the Customer’s statutory rights under applicable consumer protection legislation.

10.       DELAYS, SUSPENSION AND EVENTS OUTSIDE OUR CONTROL

10.1 Estimated Dates

Any commencement dates, attendance dates, completion dates or installation dates provided by the Company are estimates only unless expressly agreed otherwise in writing.

10.2 Reasonable Endeavours

The Company shall use reasonable endeavours to carry out and complete the Works within any estimated timescales provided to the Customer.

10.3 Events Outside the Company’s Control

The Company shall not be liable for any delay, disruption, suspension or failure to perform its obligations where such delay arises from circumstances beyond its reasonable control.

Such circumstances may include, but are not limited to:

(a) adverse weather conditions;

(b) flooding, fire or natural disasters;

(c) acts of government or regulatory authorities;

(d) utility failures;

(e) material shortages;

(f) supplier delays;

(g) transportation issues;

(h) labour shortages;

(i) industrial action;

(j) public health emergencies;

(k) discovery of asbestos or hazardous materials; and

(l) any other event beyond the Company’s reasonable control.

10.4 Customer Delays

The Company shall not be responsible for delays arising from:

(a) failure to provide access;

(b) delayed instructions or approvals;

(c) failure to obtain permissions or consents;

(d) customer-requested changes or Variations;

(e) delays caused by third parties engaged by the Customer; or

(f) failure to complete preparatory works.

10.5 Extension of Time

Where any delay occurs for reasons beyond the Company’s reasonable control, the Company shall be entitled to a reasonable extension of time to complete the Works.

10.6 Suspension of Works

The Company may suspend the Works where:

(a) payment becomes overdue;

(b) access is unavailable;

(c) health and safety concerns arise;

(d) further instructions are required from the Customer;

(e) unforeseen circumstances arise; or

(f) continuation of the Works would be unsafe, unlawful or impractical.

10.7 Additional Costs Arising from Delays

Where delays are caused by the Customer or circumstances for which the Customer is responsible, the Company reserves the right to recover any reasonable additional costs incurred, including labour costs, administration costs, remobilisation costs, storage charges and supplier charges.

10.8 Storage Charges

Where Goods, materials or equipment cannot be delivered, installed or utilised due to delays caused by the Customer, the Company reserves the right to charge reasonable storage and handling costs.

10.9 Cancellation Following Extended Delay

Where the Works are delayed for a prolonged period due to circumstances outside the control of both parties, the Company reserves the right to terminate the Contract upon written notice.

In such circumstances, the Customer shall pay for all Works completed and all costs reasonably incurred up to the date of termination.

10.10 No Liability for Consequential Delay

The Company shall not be liable for any indirect loss, consequential loss, loss of profit, loss of income, loss of business opportunity or other financial loss arising from any delay to the Works.

11.       COMMISSIONING, COMPLETION AND HANDOVER

11.1 Testing and Commissioning

Where applicable, the Company shall test and commission the Works upon completion to ensure that the installation is operating in accordance with relevant industry standards and manufacturer requirements.

11.2 Practical Completion

The Works shall be deemed practically complete when they are substantially finished and capable of being used for their intended purpose, notwithstanding the existence of minor defects, snagging items or outstanding documentation.

11.3 Handover

Upon completion of the Works, the Company shall provide the Customer with any documentation reasonably required in relation to the installation, where applicable.

Such documentation may include:

(a) manufacturer warranties;

(b) operating instructions;

(c) commissioning certificates;

(d) Building Regulations documentation;

(e) Gas Safe certification;

(f) MCS certification;

(g) warranty registration information; and

(h) maintenance guidance.

11.4 Customer Inspection

The Customer shall inspect the Works as soon as reasonably practicable following completion and notify the Company of any apparent defects, omissions or snagging items.

11.5 Snagging Items

The existence of minor defects, snagging items or outstanding non-essential works shall not prevent practical completion from taking place.

The Company shall be given a reasonable opportunity to rectify any genuine snagging items identified.

11.6 Access for Remedial Works

Where remedial works are required, the Customer shall provide reasonable access to enable the Company to carry out such works.

11.7 Completion Certificates

Where applicable, the Company shall provide any certificates, notifications or registrations required by law or industry regulation within a reasonable period following completion.

11.8 MCS and Renewable Energy Installations

Where the Works involve renewable energy technologies, including air source heat pumps or other MCS-certified installations, the Company shall comply with the requirements of any applicable accreditation or certification scheme in force at the time the Works are carried out, including (where applicable) the Microgeneration Certification Scheme (MCS) and the Renewable Energy Consumer Code (RECC).

11.9 Customer Responsibilities Following Handover

Following completion, the Customer shall operate, maintain and service the installation in accordance with the manufacturer’s recommendations and any guidance provided by the Company.

The Company shall not be liable for defects, failures or performance issues arising from improper use, lack of maintenance or failure to follow such recommendations.

11.10 Deemed Acceptance

The Works shall be deemed accepted by the Customer upon the earliest of:

(a) practical completion;

(b) occupation or use of the installation;

(c) payment of the final invoice; or

(d) fourteen (14) days following completion where no defects have been reported to the Company.

11.11 Changes to Industry Requirements

Where industry standards, accreditation requirements or regulatory obligations change after completion of the Works, the Company shall not be responsible for retrospectively upgrading, modifying or replacing any installation, provided the installation complied with the applicable requirements in force at the date the Works were completed.

12.       INSURANCE

12.1 Company’s Insurance

The Company shall maintain appropriate insurance cover in relation to its business activities, including public liability insurance and any other insurance required by law or industry regulation.

12.2 Evidence of Insurance

Evidence of the Company’s insurance cover may be provided upon reasonable request.

12.3 Customer’s Insurance

The Customer is responsible for maintaining adequate insurance in relation to the Property and any contents, fixtures, fittings, equipment or possessions located at the Property.

12.4 Notification to Insurers

The Customer is responsible for notifying their own insurers of any Works where such notification may be required under the terms of their insurance policy.

12.5 Existing Property Conditions

The Company shall not be responsible for any defects, damage, deterioration or issues arising from pre-existing conditions at the Property that are not caused by the Company’s negligence.

12.6 Insurance-Backed Guarantees

Where applicable, and where required by any regulatory body, manufacturer, warranty provider, MCS scheme, RECC scheme or other accreditation body, the Company may provide the Customer with the benefit of an insurance-backed guarantee.

Any such guarantee shall be subject to the terms and conditions of the relevant insurer or guarantee provider.

12.7 Limitation of Insurance Obligations

Nothing within these Terms and Conditions shall require the Company to maintain insurance beyond that which is reasonably required by law, industry regulation or normal business practice.

13.       LIMITATION OF LIABILITY

13.1 Nothing in these Terms and Conditions shall exclude or limit the Company’s liability for:

(a) death or personal injury caused by its negligence;

(b) fraud or fraudulent misrepresentation;

(c) any matter for which liability cannot lawfully be excluded or limited; or

(d) any rights available to the Customer under applicable consumer protection legislation.

13.2 Subject to clause 13.1, the Company shall not be liable for any loss, damage, cost or expense that:

(a) was not reasonably foreseeable;

(b) arises from circumstances outside the Company’s reasonable control;

(c) results from information supplied by the Customer that is inaccurate, incomplete or misleading; or

(d) arises from the acts or omissions of third parties not engaged by the Company.

13.3 The Company shall not be liable for any loss or damage arising from:

(a) pre-existing defects, faults or deterioration within the Property;

(b) hidden defects that were not reasonably discoverable before commencement of the Works;

(c) customer-supplied materials, equipment or appliances;

(d) misuse, neglect or improper operation of any installation;

(e) unauthorised alterations, repairs or modifications carried out by third parties; or

(f) the Customer’s failure to properly maintain any installation or equipment.

13.4 Subject to clause 13.1, the Company shall not be liable for any indirect, consequential or economic loss including, but not limited to:

(a) loss of profit;

(b) loss of revenue;

(c) loss of business opportunity;

(d) loss of contracts;

(e) loss of goodwill; or

(f) loss of anticipated savings.

13.5 The Company shall not be responsible for delays, losses or additional costs arising from:

(a) material shortages;

(b) supplier delays;

(c) utility failures;

(d) adverse weather conditions;

(e) regulatory requirements; or

(f) circumstances beyond its reasonable control.

13.6 Where the Customer is acting in the course of a business, trade or profession, the Company’s total aggregate liability arising under or in connection with the Contract shall not exceed the total amount paid by the Customer under the Contract.

13.7 The Customer shall take reasonable steps to mitigate any loss, damage or expense that may arise in connection with the Works.

13.8 The limitations contained within this clause shall continue to apply following completion of the Works and termination of the Contract.

14.       DATA PROTECTION AND PRIVACY

14.1 Data Protection

The Company shall process all personal data in accordance with applicable data protection legislation, including the UK General Data Protection Regulation (UK GDPR), the Data Protection Act 2018 and any replacement legislation.

14.2 Information Collected

The Company may collect, store and process personal information provided by the Customer for the purpose of:

(a) providing quotations and proposals;

(b) supplying Goods and Services;

(c) arranging appointments and installations;

(d) processing payments;

(e) registering warranties and guarantees;

(f) complying with legal and regulatory obligations; and

(g) dealing with customer enquiries, complaints and aftercare services.

14.3 Disclosure of Information

The Company may share personal information with:

(a) employees, agents and subcontractors involved in the Works;

(b) manufacturers for warranty registration purposes;

(c) regulatory bodies and certification schemes where required;

(d) insurers and professional advisers; and

(e) any authority where disclosure is required by law.

14.4 Storage of Information

The Company shall take reasonable steps to protect personal information from unauthorised access, loss, misuse or disclosure.

14.5 Retention of Information

Personal information shall only be retained for as long as reasonably necessary for business, legal, regulatory or contractual purposes.

14.6 Customer Rights

The Customer may request access to their personal information and may exercise any rights available to them under applicable data protection legislation.

14.7 Privacy Policy

Further information regarding how the Company processes personal data may be contained within the Company’s Privacy Policy, which is available upon request or via the Company’s website.

14.8 Photographs and Records

The Company may retain photographs, videos, inspection records, quotations, invoices, communications and other records relating to the Works for operational, compliance, insurance, training and evidential purposes.

Such records shall be handled in accordance with applicable data protection legislation.

15.       COMPLAINTS AND DISPUTE RESOLUTION

15.1 Customer Complaints

If the Customer is dissatisfied with any aspect of the Goods, Services or Works provided by the Company, they should notify the Company as soon as reasonably practicable and provide details of their concerns.

15.2 Complaint Procedure

Upon receipt of a complaint, the Company shall investigate the matter and use reasonable endeavours to resolve the issue promptly and fairly.

The Company may request additional information, photographs, documentation or access to the Property in order to properly investigate the complaint.

15.3 Opportunity to Remedy

The Customer shall provide the Company with a reasonable opportunity to inspect and, where appropriate, remedy any alleged defect, fault or issue before instructing any third party to carry out remedial works.

15.4 Access for Investigation

The Customer shall provide reasonable access to the Property to enable the Company to inspect the Works and investigate any complaint.

15.5 Escalation of Complaints

Where a complaint cannot be resolved through discussions between the parties, both parties shall seek to resolve the dispute in good faith before commencing legal proceedings.

15.6 RECC Complaints

Where the Works relate to renewable energy technologies covered by the Renewable Energy Consumer Code (RECC), the Customer may have access to the RECC complaints and dispute resolution process.

Details of the RECC complaints procedure are available at www.recc.org.uk or any replacement website operating from time to time.

15.7 MCS Installations

Where the dispute relates to an installation carried out under the Microgeneration Certification Scheme (MCS), the Customer may also have access to the relevant MCS complaints procedure and associated dispute resolution processes.

15.8 Alternative Dispute Resolution

Nothing in these Terms and Conditions prevents either party from seeking to resolve a dispute through mediation, conciliation, arbitration or any other recognised alternative dispute resolution process.

15.9 Legal Proceedings

Nothing in this clause shall prevent either party from taking legal action where necessary to protect their legal position, recover sums due or enforce their rights under the Contract.

15.10 Continuing Obligations

Unless the dispute makes it impossible to do so, both parties shall continue to comply with their obligations under the Contract whilst any complaint or dispute is being investigated or resolved.

16.       TERMINATION AND CANCELLATION

16.1 Termination by the Company

The Company may terminate the Contract immediately by written notice where:

(a) the Customer fails to make any payment when due;

(b) the Customer materially breaches any provision of the Contract;

(c) the Customer fails to provide access to the Property;

(d) the Customer prevents or obstructs the Works;

(e) the Company reasonably believes that continuing the Works would be unsafe, unlawful or impractical; or

(f) the Customer becomes insolvent or enters into any arrangement with creditors where the Customer is acting in the course of business.

16.2 Suspension Prior to Termination

Before exercising its right to terminate under clause 16.1, the Company may, at its discretion, suspend the Works and provide the Customer with an opportunity to remedy the issue.

16.3 Termination by the Customer

The Customer may terminate the Contract where:

(a) the Company commits a material breach of the Contract and fails to remedy that breach within a reasonable period after receiving written notice; or

(b) the Company confirms that it is unable to complete the Works.

16.4 Payment Following Termination

Upon termination of the Contract for any reason, the Customer shall immediately pay:

(a) all invoices issued and outstanding;

(b) the value of all Works completed up to the date of termination;

(c) the cost of all materials ordered, supplied or committed to by the Company; and

(d) any other reasonable costs incurred by the Company in connection with the Contract.

16.5 Special Order Goods

Where Goods have been specially ordered, manufactured, customised or obtained specifically for the Customer, the Customer shall remain liable for the cost of those Goods notwithstanding termination of the Contract.

16.6 Removal of Goods and Equipment

Where ownership of Goods has not passed to the Customer, the Company reserves the right to enter the Property at reasonable times and recover such Goods, equipment or materials.

The Customer shall provide reasonable access for this purpose.

16.7 Rights Accrued

Termination of the Contract shall not affect any rights, remedies, obligations or liabilities that have accrued before the date of termination.

16.8 Survival of Clauses

Any provision of these Terms and Conditions which by its nature is intended to survive termination shall remain in full force and effect following termination of the Contract.

17.       ASSIGNMENT AND SUBCONTRACTING

17.1 Assignment by the Company

The Company may assign, transfer, novate or otherwise deal with any of its rights and obligations under the Contract to another suitably qualified person or organisation.

17.2 Subcontracting

The Company reserves the right to appoint employees, agents, consultants or suitably qualified subcontractors to carry out all or part of the Works.

17.3 Responsibility for Subcontractors

Where the Company appoints subcontractors, the Company shall remain responsible for the performance of the Works carried out by those subcontractors.

17.4 Assignment by the Customer

The Customer may not assign, transfer or otherwise dispose of any rights or obligations under the Contract without the Company’s prior written consent.

17.5 Successors and Assigns

The Contract shall be binding upon and benefit the parties and their respective successors, permitted assigns and legal representatives.

18.       GENERAL PROVISIONS

18.1 Entire Agreement

These Terms and Conditions, together with any quotation, proposal, specification, acceptance form, invoice or other document expressly incorporated into the Contract, constitute the entire agreement between the parties.

The Customer acknowledges that they have not relied upon any statement, representation or promise not expressly set out within the Contract.

18.2 Variation of the Contract

No amendment, variation or modification of the Contract shall be binding unless agreed in writing by both parties.

18.3 Severance

If any provision of the Contract is found by a court or other competent authority to be invalid, illegal or unenforceable, that provision shall be deemed severed and the remaining provisions shall continue in full force and effect.

18.4 Waiver

No failure or delay by either party in exercising any right or remedy under the Contract shall constitute a waiver of that right or remedy.

Any waiver shall only be effective if made in writing.

18.5 Third Party Rights

A person who is not a party to the Contract shall have no right to enforce any provision of the Contract pursuant to the Contracts (Rights of Third Parties) Act 1999.

18.6 Notices

Any notice required to be given under the Contract shall be in writing and may be delivered:

(a) by hand;

(b) by first class post;

(c) by email; or

(d) by any other electronic communication method agreed between the parties.

A notice shall be deemed received:

(i) if delivered by hand, on delivery;

(ii) if sent by post, two Business Days after posting; and

(iii) if sent by email, on the date of transmission unless the sender receives notification that the email has not been delivered.

18.7 Relationship of the Parties

Nothing within the Contract shall create or be deemed to create any partnership, joint venture, agency relationship or employment relationship between the parties.

18.8 Further Assurance

Each party shall execute and do all such further acts, documents and things as may reasonably be required to give effect to the provisions of the Contract.

18.9 Electronic Signatures

The parties agree that the Contract may be executed electronically and that any electronic signature, digital acceptance or electronic confirmation shall have the same legal effect as a handwritten signature.

18.10 Interpretation

Headings are included for convenience only and shall not affect the interpretation of the Contract.

Words importing the singular shall include the plural and vice versa, and references to any gender shall include all genders where the context permits.

19.       GOVERNING LAW AND JURISDICTION

19.1 Governing Law

The Contract and any dispute or claim arising out of or in connection with it, its subject matter or its formation shall be governed by and construed in accordance with the laws of England and Wales.

19.2 Jurisdiction

Subject to any rights available to consumers under applicable law, the courts of England and Wales shall have exclusive jurisdiction to settle any dispute or claim arising out of or in connection with the Contract, its subject matter or its formation.

19.3 Alternative Dispute Resolution

Nothing in this clause shall prevent either party from attempting to resolve a dispute through negotiation, mediation, conciliation or any other recognised alternative dispute resolution procedure before commencing court proceedings.